CCNA training course in New York

행사 실시 중 - 9월15일 까지
MCSE 클래스와 함께 수강하시면 A+가 무료로 총액 $2500의 수강료

PCTECH의 CCNA클래스는, CCNA 네트워크 어소시에이트 인정자격에 준거하고 있습니다. 중•소 규모 루터를 사용한 네트워크., 스위치 네트워크의 도입과 운용, WAN의 접속, Wireless 네트워킹의 실천 및 문제해결을 포함합니다.

영어로 기술된 학습 내용

Configure IP addresses, subnet mask on routers and hosts. Configure routing protocols.
Perform initial configuration on a switch and configure swiches with VLAN.
Implement and troubleshoot Access Lists on routers. Perform VLAN and routing protocol troubleshooting. Perform WAN troubleshooting. Describe STP. Evaluate TCP/IP communication and its associated protocols. Evaluate rules of packet control. Utilize the OSI model as a guide for network troublshooting. Design an internetwork using Cisco technology.

The student will learn to describe the functions of various network devices.
Select correct components to meet proper network specification.
Use the OSI and TCP/IP models to explain how data flows in a network.
Describe the impact of applications ( Voice Over IP and Video Over IP) on a network.
Determine the path between two hosts across the network.
Differential between LAN and WAN operations.

Select appropriate media, cable and connectors to connect switches to other network devices and hosts.
Perform and verify initial switch configuration tasks including remote access management.
Verify network status and switch operation using basic utilities like ping, traceroute, telnet, SSH, arp, ipconfig, Show and debug commands.
Identify describe and resolve common switched network media issues, configuration issues, auto negotiation and switch hardware failures.
Describe enhanced switching technologies including but not limited to VTP, VLAN, PVSTP and 802.1q.
Configure verify and troubleshoot VTP and inter-VLAN routing.
Implement basic switch security including port security, trunk access, management, VLAN other than VLAN1.

Describe the operation and benefits of using private and public IP addressing.
Explain the operation and benefits of using DHCP and DNS.
Configure, verify and troubleshoot DHCP, DNS operation on a router.
Implement static and dynamic addressing services for hosts in a LAN environment.
Calculate and apply an addressing scheme using VLSM IP addressing design to a network.
Describe IPv6 addresses.
Identify and correct problems associated with IP addressing and host configurations.

Describe basic routing concepts including packet forwarding, router lookup process.
Describe operation of routers including router boot-up, POST and router components.
Configure, verify and troubleshoot RIPv2.
Configure, verify and troubleshoot OSPF.
Configure, verify and troubleshoot EIGRP
Verify router hardware and software operations using SHOW and DEBUG commands.
Implement basic router security.

Describe the standards associated with wireless media including IEEE WI-FI alliance, ITU/FCC.
Identify and describe the purpose of the components in a small wireless network using SSID, BSS, ESS.
Identify the basic parameters to configure on a wireless network to ensure that devices connect to the correct access point.
Compare and contrast wireless security features and capabilities of WPA including open, WEP, WPA-1 and WPA-2.
Identify common issues with implementing wireless networks including interface, miss configurations.

Describe today’s increasing network security.
Explain the need to implement a comprehensive security policy to minimize the threats.
Describe the functions of common security appliances and applications.
Describe recommended security practices including initial steps to secure network devices.

Describe the purpose and types of ACL.
Configure and apply ACL based on network filtering requirements including CLI/SDM.
Configure and apply ACL to limit telnet and SSH access to the router.
Verify and monitor ACL in a network environment.
Troubleshoot ACL issues.
Explain the basic operation of NAT.
Configure NAT for the given network requirements.
Troubleshoot NAT issues.

Describe different methods for connecting to a WAN.
Configure and verify a basic WAN serial connection.
Configure and verify Frame Relay on Cisco Routers.
Describe VPN technology including importance, benefits, role, impact, components.
Configure and verify a PPP connection between routers.